| Type of Assembly | SMT,Thru-hole |
| Solder Type | Water Soluble Solder Paste,Leaded and Lead-Free |
| Components | Passive Down to 0201 size |
| BGA and VFBGA |
| Leadless Chip Carriers/CSP |
| Double-sided SMT Assembly |
| Fine Pitch to 0.8mils |
| BGA Repair and Reball |
| Part Removal and Replacement |
| Bare PCB Size | Smallest:0.25*0.25 inches |
| Largest:20*20 inches |
| File Formate | Bill of Materials |
| Gerber files |
| Pick-N-Place file |
| Types of Service | Turn-key,partial turn-key or consignment |
| Component package | Cut Tape,Tube,Reels,Loose Parts |
| Turn Time | Same day service to 15 days service |
| Testing | Flying Probe Test,X-ray Inspection AOI Test |
| PCBA certification | UL Approval,ROHS,ISO9001:2000 |
4. Lead time
| Category | Quickest Lead time | Normal Lead Time | Mass Production |
| 2 Layers | 24hrs | 3-4 working days | 8-15 working days |
| 4 Layers | 48hrs | 3-5 working days | 10-15 working days |
| 6 Layers | 72hrs | 3-6 working days | 10-15 working days |
| 8 Layers | 96hrs | 3-7 working days | 14-18 working days |
| 10 Layers | 120hrs | 3-8 working days | 14-18 working days |
| 12 Layers | 120hrs | 3-9 working days | 20-26 working days |
| 14 Layers | 144hrs | 3-10 working days | 20-26 working days |
| 16-20 Layers | Depends on the specific requirements |
| Above 20 Layers | Depends on the specific requirements |
5. Manufacturing Equipment
6. Certificate
7. Workshop
8. FAQ
Q1: What service do you have?
- We provide turnkey solution including RD, PCB fabrication, SMT, final assembly,testing and other value-added service.
Q2: What are the main products of your PCB/PCBA services?
- Our PCB/PCBA services are mainly for the industries including Medical, Automotive, Energy, Metering/Measurements, Consumer Electronics.
Q3: Is Abis a factory or trade company?
- Abis is a company with two PCB factories located in Shenzhen, Guangdong, China.
Q4: Can we inspect quality during production?
- Yes, we are open and transparent on each production process with nothing to hide.We welcome customer inspect our production process and check in house.
Q5: What is your record for "on time" delivery?
- We strive for 100%, but currently run 97-99% on time.
Q6: What happens if the design changes while in process?
- We are quite resourceful and may be able to incorporate the changes in process. If the changes are too drastic, we will be forced to restart the order.
Q7: What do you require in order to produce an assembly quotation?
- Bill of materials (BOM) detailing:
a), manufacturers parts numbers,
b), components suppliers' parts number (e.g. Digi-key, Mouser, RS )
c), PCBA sample photos if possible.
d), Quantity
